When was the last time you thought about your home’s wiring? The fact is, fire departments respond to over 25K home electrical fires that result in almost 300 deaths per year. Approximately 39% of all home electric fires involve receptacles and outlets, and interior house wiring along with other electrical components.
Even though these numbers are shocking, there are steps a homeowner can take to keep their home from becoming part of this statistic. One of the best strategies is to call a professional company, such as Accurate to provide an inspection to see if rewiring is necessary. It’s also smart to get to know some of the warning signs of an issue, which can be found here.
Excessive Use of Extension Cords
Besides creating a huge tripping hazard, there is a tell-tale reason that electric wires are kept inside the walls – protected wiring systems will suffer much less wear and tear and other issues. If cords are exposed, they can become kinked, pinched, or shorted out. This may cause tripped breakers, damaged outlets, and a fire. If extension cords are used, this should be done short-term, like for the holidays or for another short-term purpose. If a homeowner discovers they regularly need more outlets, then it may be time to call Accurate Electric Plumbing Heating & Air for a home electrical rewiring service.
Sometimes, a new appliance can create a strange odor the first few times it is used. However, if this unusual smell comes from an outlet, it is best to turn it off, unplug anything that is plugged in, and don’t use it again until you have contacted an electrician from https://www.accurateelectricplumbingheatingandair.com/contact/ to look into the problem.
How Switch Plates and Outlets
Even if you are only using an appliance that uses heat, like a space heater, the outlet should never feel hot when touched. Switchplates may be a bit warm, but if it gets too hot for someone to touch, it is best to remove all the plugs. If it stays hot when nothing is plugged into it, the outlet could be wired improperly. Be sure to consult an electrician who may provide advice about shutting the breaker for the outlet off until the system is serviced.
Frequently Tripped Breakers and Blown Fuses
The fuses and circuit breakers connected to a home’s electric system are designed to fail or turn off before the system becomes overloaded. If there is an appliance that regularly trips a breaker, no matter what outlet is used, chances are the appliance is to blame. However, if there is an outlet that blows the fuse regularly, the circuit is likely overloaded. It is best to contact the professionals to investigate the underlying issue.
Buzzing or Humming Sounds
If the electricity is working properly, there should not be any noise heard. It will flow quietly from one connection to the next. However, if there are fraying wires, loose outlets, or bent prongs, the current may jump, which will cause that buzzing sound.
Be sure to contact the professionals if any of these issues are seen. They can determine what the issue is and repair it or suggest a complete home rewire.
Company Name: Accurate Electric Plumbing Heating & Air
Contact Person: Media Relations
Email: Send Email
Phone: (800) 947-1747
Address:734 E Laurel Ave
Country: United States