Have interest and click the website to consult:
Before you wear C5 smart helmet, please check the following matters: Check whether the appearance of C5 helmet has crack, abrasion and the integrity of cap lining etc. please repair or dump in time; Check whether each component is fastened; Check whether each of the functional module is in good condition, whether there is enough battery capacity.
The following matters users need to keep in mind. Do not clean C5 with detergent, as it may cause damage to the EPS; Change or remove the original accessories are forbidden; Do not wear C5 once it has experienced a big impact and has a crack; Do not wear C5 intelligent helmet when ride motorcycles; Do not wear C5 in engineer operation, as it cannot replace the Safety Helmet.
high temperature(>110?F or 43?C) will cause damage to the shell of the helmet. Do not place it near any heat source. The protection function of the helmet will decrease with the passage of time and it is influenced by many factors, such as impact, contamination of harmful chemicals or exposure in sunshine etc. This helmet should not be used by children while climbing or doing other activities when there is a risk of strangulation/hanging if the child gets trapped with the helmet.
Please use a soft cloth dipped in a little alcohol to wipe the helmet shell, inside liner, fixed system and other accessories. Please use the lens cloth to wipe the lens gently. This helmet should be stored in the dry and ventilated places in indoor temperature. If it is not used for a long time, it needs to be fully charged and shutdown. It is recommended to charge fully every month.
Video Link: http://www.youtube.com/embed/0pfxcXLtsiQ
Please bear in mind wearing C5’s helmet heads up display in the right way can prevent your head from being injured by absorbing and spreading the impact energy. However, not all kinds of accidents can be prevented by the helmets. The proper maintenance of Airwheel C5 will prolong its service life.
Company Name: Airwheel Technology Holding (USA) Co., Ltd
Contact Person: Eric
Country: United States