How To Replace the Frame of Airwheel Mini Electric Scooter – Z3

Airwheel Z3 is an innovative electric means of transport that combines the minimal size of a scooter with the ability to move about independently, thanks to a small but powerful silent motor. The foldable frame contributes much to the portability and the following is to show how to get the frame changed.

Have interest and click the website to consult:

Airwheel Z3 foldable electric scooter is a combination of fashion and humanization to be more intelligent and smaller. The exclusive App designed for Airwheel can monitor the real time data. On the bar, there is equipped with a phone bracket for riders to store their phones. From the exterior design of Z3 Lightweight Electric Scooter, including its operating arm and foldable pedals, Z3 standing up electric scooter is much easier and more convenient to carry, thanks to the multi-foldable system. Besides, users can easily hold it since it is only 11.6kg.

For more information, visit:

The frame plays a key role to provide riders with comfortable riding experience and the following shows how to get the frame changed. Firstly, remove the brake line and the rear fork. Z3 2-wheeled electric scooter is equipped with an emergency braking system if the situation demands it, by simply pressing on the handlebar clamp. These designs will make riders to have a carefree journey.


Secondly, remove the left and right pedals. Then you need to remove the stand pipe. Please pay attention to the small components and do not loss them.

2-wheeled electric scooter

Thirdly, remove the folded structure. Z3 electric scooter for adults is famous for its strong foldability and it may be a little complicated to remove them.


Then, you are to remove the plastic gear piece and unscrew the locking screws one by one.

motorized scooter

The fifth step is to paste the PVC gaskets on both sides.

Lightweight Electric Scooter

After all the steps are finished, now you can install and fix the folded structure.

foldable electric scooter

Based on the removing steps, you can install the components one by one. Install the stand pipe, locking piece, rear fork assembly, and plastic gear piece.

folding electric scooter

Then, fix the folded locking piece and install the two pedals. Organize and fasten lines.

electric hoverboard

Install the brake cable and battery box and arrange the connecting lines to finish the replacement steps.

2 wheel electric scooter

If the above steps cannot satisfy you, you are welcomed to visit to watch the maintenance video.

Video Link:

Media Contact
Company Name: Airwheel Holding Limited
Contact Person: Eric
Phone: +8618651968700
Country: United States