MCHP systems are capable to generate electricity and heat with up to 80% efficiency whereas the coal based power plant has an operational efficiency of maximum 35%. Additionally, since the MCHP systems are installed near to the end use points, the transmission and heat losses are minimal. This drives the demand for MCHP systems over the conventional power generation methods. Besides, MCHP systems are helpful in reduction of carbon footprints, which is a major concern today with increasing climate change. According to the study conducted by decentralized energy organization, an engine-based MCHP system unit can save 1.7 tons of carbon dioxide, annually, for domestic purposes, and a solid oxide fuel cell (SOFC) is able to save more than 4 tons of carbon dioxide, per year. However, infrastructural hurdles faced in maintenance of MCHP systems is hampering the global market for MCHP.
The main output of the MCHP systems is heat with some electricity generation, at a typical ratio of 6:1 (heat to electricity). The buildings that include residential and commercial infrastructure contributed to around 21% of the total energy consumption, in 2015. As mentioned in the definition of Energy Efficiency Directive of European Union, MCHP technology is appropriate to be applied in residential, public and commercial buildings to supply a range of heat and electricity usage. The greatest advantage that MCHP offers is their small size, which is the same as of the domestic boilers, thus, can be installed anywhere in the buildings. Other benefits served by the MCHP technology include carbon savings, balancing renewables, job creation through electricity generation, and empowering energy consumers.
Global MCHP market has been segmented on the basis of type, technology, application and region. Based on type, the market is further classified as engine based and fuel-cell based. The fuel-cell based segment is expected to dominate the market due to increased focus on fuel cell technology and its benefits over the conventional power generation systems. The engine based MCHP has power generation capacity of 1 kWh, while the fuel-cell based MCHP can generate up to 2kWh of power and has an electrical output of more than 65% efficiency. Segregating the technology segment, the sub-segments are internal combustion engine, PEMFC, Rankine cycle engine, Stirling engine, and SOFC. Amongst these, Stirling engine and SOFC segments are the most successful technology segments due to their capacity of saving more carbon footprint and greater operational efficiency than rest of the sub-segments. Based on application, the market is further segmented as residential and commercial. Commercial segment accounts for the largest segments, due to funding and incentives provided by the government to install the MCHP systems. Also, the unused electricity generated, can be sold back to the grid, through which the commercial segments make profits, thus contributing the largest market share.
Get Sample Report @ https://www.marketresearchfuture.com/sample_request/1109
Industry Top Key Players:-
Some of the key players of global MCHP market are Honda Power (Japan), Vaillant Group (Germany), Yanmar Holdings Co. Ltd. (Japan), Ceres Power Holdings PLC (U.K), Qnergy (U.S.), Aisin Group (Japan), BDR Thermea Group (U.K), Centrica plc (U.K), Mondragon Corporation (Spain), Viessmann Group (Germany), Dantherm Power (Denmark), Nucusa Energy (U.S.), and Solid Power (U.S.).
Major Points of TOC:-
1 Executive Summary
2 Scope Of The Report
3 Market Landscape
4 Market Dynamics
5 Global MCHP Market, By Type
6 Global MCHP Market, By Technology
7 Global MCHP Market, By Application
8 Global MCHP Market, By Region
9 Competitive Landscape
10 Company Profile
11 List Of Tables
12 List of Figure
Browse Complete Report @ https://www.marketresearchfuture.com/reports/mchp-market-1109
Market Research Analysis:-
Global MCHP market is expected to witness massive growth during the forecast period due to increasing demand for power and focus on reduction of carbon footprints. The governments are also supporting the installation of MCHP system, which further enhances the growth of market. Europe is the one of the leading regions in the MCHP market with the increasing concern for clean and efficient energy systems. Besides, the weather conditions in Europe are most of the times cold, thus there is a high demand for heating from the residential and commercial buildings. This leads to growth of MCHP systems market from the region. For an instance, the European Union has implemented Energy Efficiency Directive at country level that promotes MCHP market by increasing CHP projects, while promoting demand response and simplifying grid connection procedures for MCHP installations. Moreover, Asia Pacific is likely to be the fastest growing region, owing to increasing demand for power from the developing countries and Japanese companies are increasing their sales of MCHP systems, thus becoming prominent vendors in the market. According to Delta EE organization, in 2015, 14% of the global MCHP sales are in Europe and the rest of the sales are in Japan. This makes Asia Pacific, the largest market share holding region in the global MCHP market.
Company Name: Market Research Future
Contact Person: Abhishek Sawant
Email: Send Email
Phone: +1 646 845 9312
Address:Market Research Future Office No. 528, Amanora Chambers Magarpatta Road, Hadapsar