News, tutorials, comments and operating methods related to embedded Linux and Android, Raspberry Pi, Arduino, ESP8266, development board, SBC, TV box, mini PC, etc.
The host or media player may not always be located in the same room as its monitor. For example, for digital signage, people may want to have multiple monitors controlled by a computer in different rooms, or they may want to add a monitor to one of their rooms In the room without having to add another TV box or set-top box.
The former is quite expensive (about $250), while the latter is only suitable for composite materials.
But there are also Ethernet to HDMI solutions
The maximum distance provided via Ethernet is 120 meters.
Both have a receiver and a transmitter, the latter is connected to the HDMI and VGA output of the host, and the former is connected to the display.
The VGA extender kit shown above can extend the signal to 60 meters, and neither the transmitter nor the receiver requires an external power supply. However, the main disadvantage is that although it is used with Cat5 cables.
So they can’t simply connect it to the switch and expect it to work, and as far as I know, they need to use a straight cable between the receiver and the transmitter.
HDMI to “Ethernet” extender seems to work
Supports direct Cat5/Cat6 connection similar to VGA models, but can also convert HDMI signals into IP packets. They have a 5V power supply on each side, use Cat6 cables, and models that cost about $40 can reach a distance of 120 meters. Please note that Banggood only sells receivers, and I cannot find the sender on their website. The cheap $25 kit on Tomtop comes with both Rx and Tx, but the range using Cat6 cable is limited to 60 meters.
The models mentioned above support a maximum resolution of 1080p60, although there are some 4K HDMI extenders on Cat6/Cat7 cables, they are obviously more expensive.
And the more expensive model can support HDMI 2.0a up to 4K at 60K Hz at a distance of 70 meters. theywill also see a $700 model on this page, but it is based on a long-distance optical fiber connection of 10 kilometers.
Since HDMI extenders work over a network, they can use routers/switches and multiple receivers to connect multiple displays to a single HDMI extender transmitter, which can be any device with Ethernet and HDMI output.
Jean-Luc started working part-time in 2010, then resigned as a software engineering manager, started writing daily news, and made full-time reviews later in 2011.
The Crowbits STEM educational kit consists of magnetic modules launched on Kickstarter a few weeks ago. There are five increasingly difficult tools in Hello Kit, which only require students to connect to the module to get started, that is, no programming is required.
people are beginning to see more and more security cameras with built-in AI functions, such as the Reolink RLC-810A 4K camera with people and vehicle detection functions or the low-cost Vacom Cam Full HD cameras with only people detection functions.
Necessary cookies are absolutely essential for the normal operation of the website. This category only contains cookies that ensure the basic functions and security features of the website. These cookies do not store any personal information.
Any cookies that are not particularly necessary for the normal operation of the website. These cookies are specifically used to collect user personal data through analysis, advertising and other embedded content, and are called unnecessary cookies.