What Are The Precautions For Cleaning The Special Operating Door In The Hospital?
The operating door used in the hospital has a very good shielding effect on the radioactive source. Its material is very special and the price is very expensive. In order to make it last longer, it needs to be cleaned for a long time, and it occupies a very high position. Yes, not only that, when cleaning, you can’t clean like ordinary doors. There are many things that need to be paid attention to. Let’s take a look at the things together for a long time.
Operating door cleaning precautions:
1. First of all, it is necessary to clean up the dust on the special door of the hospital in time, keep the special door and the lead glass beside the door clean, and keep the door, laminated glass and hardware clean and bright. Even the stainless steel plate, once stained with dust and other stains, its compound will corrode the surface of the stainless steel plate, affecting the corrosion of the steel body for a long time, endangering the use characteristics of radiation, and causing unnecessary radiation risks.
2. Some contaminants are items that cannot be cleaned. For example, the special door of the hospital is covered with oil stains and other dirt that cannot be directly cleaned. It can be cleaned with Jieerliang, but do not use strong alkaline or strong acid water-based chemicals to clean these oil stains, because this will not only easily damage the surface finish of the aluminum alloy profile, but also damage the protective film, resulting in oxidation of the surface and air, causing hospitalization. Corrosion of doors.
3. When cleaning the special door of the hospital, the particle dirt inside the frame should be removed immediately to prevent the drain pipe or safety channel from being blocked. Once clogged, drainage can be difficult. If the consequences are serious, it will continue to endanger the use of the hospital’s special door, reduce the service life of the hospital’s special door, and there are potential safety hazards.
How to clean the operating door:
1. Medical door leaf cleaning:
The special door leaf material of the induction hospital is made of tempered glass. Since the medical door leaf is transparent, once the stains are exposed, the dirty part needs to be carefully cleaned when cleaning the medical door leaf. General dirt can be wiped with a soft cloth dipped in neutral detergent, and stubborn dirt can be wiped with alcohol or gasoline.
2. Sensor cleaning
Under normal circumstances, the sensor of the medical automatic door is easy to stick to dust, which greatly reduces the sensitivity of the sensor and causes sensor obstacles. Therefore, when cleaning, you need to “wipe” with a clean soft cloth. Be careful not to wipe the actuator when scrubbing. Move the detection direction of the sensor away to avoid changing the direction the sensor is being detected in. Medical sliding automatic door, the full name of hospital operating room door, is installed in clean rooms, clean corridors, operating rooms and other places with similar cleanliness requirements, called medical doors. The special controller for operating the door and the foot sensor switch have excellent performance. The medical staff only need to put their feet into the switch box to realize the switch of the automatic door, and can also operate through the manual switch.
3. Surrounding cleaning:
The side of the ward door is always facing outward, so when the medical door is opened, the dust, impurities, fallen leaves and other substances from the outside can easily fall on the running track of the induction medical door. Therefore, when cleaning, you should pay attention to cleaning the induction door rails, especially the garbage on the grooves of the sliding rails.
There are many things to pay attention to when cleaning the operating door. The cleaning and maintenance of the medical door can make it last longer, so the cleaning work in the hospital also needs to be serious. The above are the precautions when cleaning and the recommended cleaning method. I hope I can help you.
Company Name: Shandong Moenke Door Industry Co., Ltd.
Email: Send Email
Address:No.8 Zhudian North Road Licheng District, Jinan